Showing 13–24 of 51 results

Show sidebar
Short By
Categories
  1. Add-On (11 items)
  2. Base Plates (4 items)
  3. Cable, Wire & Power Management (4 items)
  4. Casters & Feet (13 items)
  5. Finishing Your Frame (6 items)
  6. Floor Brackets & Bases (3 items)
  7. Floor to Frame (17 items)
  8. Hinges (1 items)
  9. Organization (2 items)
  10. Panel & Mesh Mounts (13 items)
  11. Panels & Door (17 items)
  12. Pressurize Your Frame (11 items)
  13. Roller Wheels (3 items)
  14. Special Offer (51 items)
Color
Series
  1. 10 Series (25 items)
  2. 10 to 15 (1 items)
  3. 15 Series (20 items)
  4. 16 Series (1 items)
  5. 20 Series (1 items)
  6. 40 Series (1 items)
  7. Imperial (9 items)

Part No: 2427

10 Series Aluminum Panel Mount Block

Limited stock

The aluminum panel mount block can be used to mount a panel flush with a profile edge or on the profile surface. There is a slot tab on the block that acts to align the mount in the T-slot. The aluminum panel mount block increases stability of the mounted panel while also reducing vibration. It is easy to use and simplifies the process of adding or removing plastic panels. The hardware to mount the block to the T-slot is included while the hardware to mount the panel to the block should be based on the panel type and thickness.

Part No: 2433

15 Series & Ready Tube Single Arm Wide Panel Retainer

Limited stock

The single arm wide panel retainer is used to mount a panel when it is recessed within the T-slot or on the profile frame. This is a stronger connection that is also simple to use, provides stability and reduces vibration. The single arm wide panel retainer is frequently used when mounting one panel to a profile or in instances when larger profile series are used to mount two panels. It requires a drill through machining service on the panel.

Part No: 2425

15 Series Aluminum Panel Mount Block

Limited stock

The aluminum panel mount block can be used to mount a panel flush with a profile edge or on the profile surface. There is a slot tab on the block that acts to align the mount in the T-slot. The aluminum panel mount block increases stability of the mounted panel while also reducing vibration. It is easy to use and simplifies the process of adding or removing plastic panels. The hardware to mount the block to the T-slot is included while the hardware to mount the panel to the block should be based on the panel type and thickness.

Part No: 2414

10 Series 1″ Economy Floor Mount Base Plate

Limited stock

The economy floor mount base plate is made of anodized aluminum to withstand daily use and wear and tear. It bolts directly to the T-slot to allow vertical adjustments and is designed with countersunk holes to incorporate floor anchors.

Part No: 2494

10 Series Single Arm Wide Mesh Retainer with Wide Backing Plate

Limited stock

The single arm wide mesh retainer with wide backing plate consists of one single arm wide mesh retainer and one wide backing plate. The hardware to attach the backing plate to the retainer should be selected based on the wire mesh panel type and thickness. The suggested hardware to mount the retainer to the T-slot can be found on the "Suggested Hardware" tab.

Part No: 2341

10 Series 2-Hole Pressure Manifold Stopper Plate

Limited stock

The 2-hole pressure manifold stopper plate is commonly used when adding a pressurized substance to a T-slot profile. It mounts on the profile end to form a secure seal. The suggested mounting hardware and gasket are included. The maximum allowable pressure is 150 psi (1034.21 kPa).

Part No: 2415

15 Series 1.5″ Economy Floor Mount Base Plate

Limited stock

The economy floor mount base plate is made of anodized aluminum to withstand daily use and wear and tear. It bolts directly to the T-slot to allow vertical adjustments and is designed with countersunk holes to incorporate floor anchors.

Part No: 2435

15 Series & Ready Tube Single Arm Wide Mesh Retainer with Wide Backing Plate

Limited stock

The single arm wide mesh retainer with wide backing plate consists of one single arm wide mesh retainer and one wide backing plate. The hardware to attach the backing plate to the retainer should be selected based on the wire mesh panel type and thickness. The suggested hardware to mount the retainer to the T-slot can be found on the "Suggested Hardware" tab.

Part No: 2451

10 Series Pressure Manifold Tap Ready Access Plate

Limited stock

The pressure manifold tap ready access plate is commonly used when adding a pressurized substance to a T-slot profile. It has a tap-ready access point, mounts to the profile side, and includes an attached O-ring to form a tight seal. The maximum allowable pressure is 150 psi (1034.21 kPa). The suggested mounting hardware is included.

Part No: 2446

10 Series 3-Hole Pressure Manifold Stopper Plate

Limited stock

The 3-hole pressure manifold stopper plate is commonly used when adding a pressurized substance to a T-slot profile. It mounts on the profile end to form a secure seal. The suggested mounting hardware and gasket are included. The maximum allowable pressure is 150 psi (1034.21 kPa).

Part No: 2416

10 Series 2″ Economy Floor Mount Base Plate

Limited stock

The economy floor mount base plate is made of anodized aluminum to withstand daily use and wear and tear. It bolts directly to the T-slot to allow vertical adjustments and is designed with countersunk holes to incorporate floor anchors.

Part No: 2447

10 Series 5-Hole Rectangular Pressure Manifold Feed Plate

Limited stock

The 5-hole rectangular pressure manifold feed plate is commonly used when adding a pressurized substance to a T-slot profile. It has a tapped hole and mounts on the profile end to seal the connection where the pressurized substance is released. The suggested mounting hardware and gasket are included. The maximum allowable pressure is 150 psi (1034.21 kPa).